RESPIRATORY PROTECTIVE MASK

INTENDED USE: Reduces wearer's exposure to particles including small particle aerosols and large droplets.Filters out at least 95% of airborne particles including large and small particles.

MODEL：G9501

EUA product letter and instruction for use  is as below

INSTRUCTION FOR USE：
1. Face the inside of the mask and hold the ear strap in each hand so that the nose bridge 
bar is over the mask. 
2. Hold the mask against your chin with your hand. 
3. Pull the Elastic adjusting button to the back of head until you feel comfortable. 
4. Place the fingers of both hands in the middle of the nose clip; while pressing inwards, 
move the finger tips along the nose clip to both sides, and press the nose clip into the 
shape of Nose Bridge completely.

5. Fit check a) To test the fit of the  protective mask without an exhalation valve, 
cup both hands over mask and inhale sharply, b) If air flow is felt in the nose area, 
re-adjust the noses clip, c) If are flows is felt around the edges of the respirator. re-po- 
sition the  protective mask to achieve a better fit. 
6.  Change  the  mask  immediately  if  breathing  becomes  difficult  or  mask  becomes damaged or distorted. 
7. Change the mask if a proper face seal cannot be achieved. 
8. Careful observances of these instructions is an important step in safe respirator use.